Sensative Strips Guard 800 – Invisible Z-Wave Door and Window Sensor
Couldn't load pickup availability
Shipping information
Shipping information
Orders placed on weekdays before 4:00 PM and in stock will be shipped the same day . In most cases, your order will be delivered the next day. More details can be found in our shipping policy .
Description
Description
Sensative Strips Guard 800 | Z-Wave 800 Door and Window Sensor | Invisible
The Sensative Strips Guard 800 is a revolutionary magnetic contact sensor for monitoring doors, windows, and other valuable objects. Its ultra-thin design (only 3mm thick ) allows it to be invisibly mounted on the inside of the door frame. The built-in battery has a lifespan of up to 10 years , meaning you'll never have to worry about charging or replacing batteries again. With the Z-Wave 800 protocol, S2 security, and SmartStart, the Strips Guard 800 is the most advanced and reliable choice for professional security in your smart home.
Note: The battery is built-in and non-replaceable . Do not install the sensor on aluminum or metal window frames, as this may affect its operation.
Key Features
Ultra-thin 3mm design for invisible mounting
At just 3mm thick, Strips Guard 800 fits invisibly between the window/door and the frame. No more unsightly blocks on your doors or windows. Perfect for architects and anyone who values design.
Battery life up to 10 years
The built-in LiMnO2 battery lasts up to 10 years with normal use. "Install and forget" – no maintenance, no battery replacements. Lifespan depends on signal strength and frequency of use.
Z-Wave 800 protocol
The latest Z-Wave 800 series offers extended range (up to 100m direct), enhanced security with S2 Secure Encryption , and lower power consumption. SmartStart makes pairing to your Z-Wave hub simple by scanning a QR code.
Suitable for indoor and outdoor use (IP65)
The strip is fully sealed and has an IP65 rating, meaning it's dustproof and resistant to water jets. Perfect for exterior doors, gates, sheds, or windows exposed to the elements.
Simple and quick installation
The sensor comes with a strong adhesive backing for easy installation. Clean the surface, attach the sensor and magnet, and pair it with your Z-Wave hub.
Technical specifications
- Article number: 1101031_1
- Manufacturer: Sensative
- Protocol: Z-Wave 800 (Z-Wave Plus V2)
- Frequency: 868.4 MHz (Europe)
- Security: S2 Secure Encryption
- Range: Up to 100 meters direct (point-to-point)
- Battery: Built-in LiMnO2 battery (non-replaceable)
- Battery life: Up to 10 years (depending on use)
- Sensor dimensions: 195 x 15 x 3 mm
- IP rating: IP65 (dustproof and water resistant)
- Operating temperature: -20°C to +60°C
- Mounting: Self-adhesive (surface-mounted)
- Features: Open/close detection with reporting via Z-Wave
Compatibility
The Sensative Strips Guard 800 is compatible with most modern Z-Wave hubs:
- Athom Homey Pro (via Sensative Strips app v2.0.1+)
- FIBARO Home Center 3 / 3 Lite / 2 / Lite
- Yubii Home Center
- Aeotec SmartThings Hub
- Home Assistant (with Z-Wave JS)
- Other Z-Wave certified hubs
Practical applications
Burglary protection
Receive an instant notification on your smartphone when a door or window is unexpectedly opened. Connect the sensor to a siren for a complete alarm system.
Energy saving
Build automations that automatically turn off the heating or air conditioning when a window is open. Prevent unnecessary energy loss.
Comfort and convenience
Automatically turn on the hallway lights when the front door opens. Or start your favorite playlist when you enter the living room.
Remote monitoring
Remotely check that all doors and windows are closed before you go on vacation. Perfect for peace of mind when you're away from home.
Securing valuable objects
Place the sensor on cabinets, drawers, medicine cabinets, or even artwork to monitor if they are opened or moved.
Installation
- Clean the surface of the frame and door/window thoroughly.
- Pair the sensor to your Z-Wave hub via the SmartStart QR code or manual inclusion.
- Remove the protective film from the sensor and stick it onto the frame.
- Place the magnet on the door/window, right next to the sensor (note the markings).
- Test the functionality by opening and closing the door/window. The status should change in your Z-Wave hub.
Tip: A single long LED flash confirms that the sensor has been successfully added to your network.
Plus points
- Ultra-thin (3mm) for invisible mounting in frames
- Battery life up to 10 years, no maintenance required
- Suitable for indoor and outdoor use (IP65 rated)
- Latest Z-Wave 800 protocol with greater range
- High security with S2 Secure Encryption
- Easy to install with SmartStart
- Works with most Z-Wave hubs, including Homey Pro
Negative points
- Battery is built-in and non-replaceable
- Higher price range than standard Z-Wave sensors
- Not suitable for mounting on aluminium or metal surfaces.
Frequently Asked Questions
Is the battery really not replaceable?
No, the battery is built-in and sealed to ensure the IP65 rating and slim design. After its lifespan (up to 10 years), the entire sensor must be replaced.
Does the sensor work with Homey Pro?
Yes, the Sensative Strips Guard 800 is supported by the official 'Sensative Strips' app (version 2.0.1 or later) in the Homey App Store. You can connect the sensor directly and use it in your Homey Flows for automations.
Can I use the sensor outside?
Yes, the sensor has an IP65 rating and is resistant to dust and water. It can be used on exterior doors, gates, shed doors, and windows, as long as the operating temperature remains between -20°C and +60°C.
What is the advantage of Z-Wave 800?
Z-Wave 800 offers a greater range (up to 100m direct), lower power consumption (longer battery life), and improved S2 security compared to older Z-Wave generations. This creates a more robust and reliable smart home network.
How do I pair the sensor?
The easiest way is via SmartStart: scan the QR code with your Z-Wave hub's app. You can also manually set it to inclusion mode by quickly moving the magnet past the sensor three times.
Why can't the sensor be mounted on metal?
Metal and aluminum can interfere with the sensor's radio signal and affect the magnet's performance. Special sensors are available for metal surfaces.
✅ slimhuisje.nl – your technology partner for smart homes, we support you with every smart home adventure!
Payment & Security
Payment convenience: pay the way you want





