Sensative Strips Drip 800 – Invisible Z-Wave Leak and Temperature Sensor

Sensative Strips Drip 800 | Z-Wave 800 Leak and Temperature Sensor | Invisible

The Sensative Strips Drip 800 is a revolutionary leak and temperature sensor, designed to invisibly monitor your home. At just 3mm thick, you can install this sensor in hard-to-reach places where leaks can occur, such as under the washing machine, dishwasher, or sink. The built-in battery lasts up to 10 years , so installation is a breeze. Besides leak detection, the Drip 800 also measures temperature and warns of freezing pipes. Thanks to the latest Z-Wave 800 protocol, S2 security, and SmartStart, this is the most advanced and reliable choice for preventing water damage.

Note: The battery is built-in and non-replaceable . While the manufacturer indicates that the product is currently not compatible with Homey Pro, recent app updates suggest that support may be possible. Check the Homey App Store for the most up-to-date status.

Key Features

Ultra-thin 3mm design for invisible installation
At just 3mm thick, the Strips Drip 800 fits anywhere. Place it under appliances, along skirting boards, or under pipes without being conspicuous. Ideal for a sleek, minimalist interior.

Detects leaks and freezing hazards
The sensor detects even the smallest droplets of water and immediately sends an alarm. The built-in temperature sensor also warns when the temperature drops below freezing, preventing frozen pipes and the resulting damage.

Battery life up to 10 years
The built-in LiMnO2 battery lasts up to 10 years with normal use. No maintenance, no battery replacements. Lifespan depends on signal strength and reporting interval.

Z-Wave 800 protocol
The latest Z-Wave 800 series offers extended range (up to 100m direct), enhanced security with S2 Secure Encryption , and lower power consumption. SmartStart makes pairing to your Z-Wave hub simple by scanning a QR code.

Suitable for indoor and outdoor use
The strip is sealed and suitable for indoor and outdoor use, with an operating temperature of -20°C to +60°C. Perfect for basements, sheds, and outdoor faucets.

Technical specifications

• Article number: 1104031_1
• Manufacturer: Sensative
• Protocol: Z-Wave 800 (Z-Wave Plus V2)
• Frequency: 868.4 MHz (Europe)
• Security: S2 Secure Encryption
• Range: Up to 100 meters direct (point-to-point)
• Battery: Built-in LiMnO2 battery (non-replaceable)
• Battery life: Up to 10 years
• Sensor dimensions: 195 x 15 x 3 mm
• Mounting plate dimensions: 193 x 14.7 x 2.7 mm
• Sensors: Water leak (via mounting plate), Temperature
• Temperature accuracy: +/- 1°C (between 0°C and 30°C)
• Operating temperature: -20°C to +60°C
• Mounting: Self-adhesive (surface-mounted)

Compatibility

The Sensative Strips Drip 800 is compatible with most modern Z-Wave hubs:

• FIBARO Home Center 3 / 3 Lite / 2 / Lite
• Yubii Home Center
• Aeotec SmartThings Hub
• Home Assistant (with Z-Wave JS)
• Other Z-Wave certified hubs

Homey Pro: The manufacturer states "Not compatible," but the Sensative Strips app has recently been updated to support 800-series products. Check the Homey App Store for the current status before ordering.

Practical applications

Under the washing machine or dishwasher
Place the sensor under your appliances and receive an immediate notification of a leak. Prevent expensive water damage to your floor and walls.

In the bathroom or kitchen
Place the sensor under the sink, behind the toilet or near the shower to immediately detect incipient leaks.

In the basement
Monitor your basement for water ingress after heavy rainfall or when the groundwater level is high. The temperature sensor also warns of the risk of freezing.

For outdoor taps or pipes
Place the sensor near an outdoor faucet or pipes in unheated areas. Receive a warning when the temperature drops below freezing, allowing you to take timely action.

In the meter cupboard
Place a sensor in the meter box near the water meter to check for leaks at the main connection.

Installation

1. Clean the surface where you want to place the sensor.
2. Pair the sensor to your Z-Wave hub via the SmartStart QR code or manual inclusion.
3. Attach the mounting plate to the desired location with the self-adhesive backing.
4. Click the sensor onto the mounting plate. The sensor is now active.
5. Test the functionality by placing a few drops of water on the mounting plate. You should receive an alert in your Z-Wave hub.

Tip: A single long LED flash confirms that the sensor has been successfully added to your network.

Plus points

• Ultra-thin (3mm) for invisible installation under devices
• Dual functionality: detects water leaks and temperature (risk of freezing)
• Battery life up to 10 years, no maintenance required
• Suitable for indoor and outdoor use (-20°C to +60°C)
• Latest Z-Wave 800 protocol with extended range and S2 security
• Easy to install with SmartStart
• Works with most Z-Wave hubs

Negative points

• Battery is built-in and non-replaceable
• Higher price range than standard Z-Wave sensors
• Homey Pro compatibility is uncertain (check app store)

Frequently Asked Questions

Is the battery really not replaceable?

No, the battery is built-in and sealed to ensure the slim design and water resistance. After its lifespan (up to 10 years), the entire sensor must be replaced.

Does the sensor work with Homey Pro?

According to the manufacturer, the Drip 800 is currently not officially compatible. However, the "Sensative Strips" app in the Homey App Store has recently been updated to support 800-series products. The sensor may work, but we recommend checking the Homey community or app reviews first.

How does the sensor detect a leak?

The special mounting plate has two detection points. As soon as water makes contact between these two points, an alarm is triggered. Even a few drops are sufficient.

How accurate is the temperature measurement?

The accuracy is +/- 1°C in the most common range (0°C to 30°C). This is very accurate for detecting the risk of frostbite or overheating.

What is the advantage of Z-Wave 800?

Z-Wave 800 offers a greater range (up to 100m direct), lower power consumption (longer battery life), and improved S2 security compared to older Z-Wave generations. This creates a more robust and reliable smart home network.

Where is the best place to place the sensor?

Place the sensor flat on the ground in the lowest spot where water would collect. Good locations include: under the washing machine, dishwasher, sink cabinet, behind the toilet, in the basement, or near the water meter.

✅ slimhuisje.nl – your technology partner for smart homes, we support you with every smart home adventure!