{"product_id":"smlight-poe-extender-1-naar-2-100mb","title":"SMLIGHT PoE Expansion Splitter | One Input, Two PoE Outputs over Ethernet","description":"\u003ch2\u003eSMLIGHT PoE Extender 1 to 2 – 100 meters extra range\u003c\/h2\u003e\n\u003cp\u003eYour PoE switch is too far away for an additional sensor or camera, and there's no power outlet nearby. The SMLIGHT PoE Extender solves this problem: it extends your Ethernet and PoE connection by up to 100 meters and simultaneously splits that line to two output ports. No extra power adapter needed, no configuration required — just plug and play.\u003c\/p\u003e\n\u003ch3\u003ePower and connectivity\u003c\/h3\u003e\n\u003cp\u003eThe extender operates completely passively: it receives power via the PoE input and distributes it to the two output ports. Input power is a maximum of 13W (IEEE 802.3af); combined output power is a maximum of 12.2W across both ports together. The Ethernet speed is 10\/100 Mbps on all ports. Auto-sensing ensures that connected devices are safely recognized without manual setup.\u003c\/p\u003e\n\u003ch3\u003eConnecting\u003c\/h3\u003e\n\u003cp\u003eConnect the PoE IN port to your PoE switch or \u003ca title=\"SMLIGHT PoE Injector slimhuisje.nl\" href=\"\/en\/collections\/smlight\"\u003ePoE injector\u003c\/a\u003e. Then connect up to two PoE devices to the output ports. No app, no configuration screen, and no external power supply are needed. Use at least Cat5e for the full 100-meter range.\u003c\/p\u003e\n\u003ch3\u003eExpansion and accessories\u003c\/h3\u003e\n\u003cp\u003eThe extender pairs well with \u003ca title=\"SMLIGHT SLZB series slimhuisje.nl\" href=\"\/en\/collections\/smlight\"\u003eSMLIGHT SLZB dongles\u003c\/a\u003e as a Zigbee coordinator in a hard-to-reach location, the \u003ca title=\"Apollo Automation slimhuisje.nl\" href=\"\/en\/collections\/apollo-automation\"\u003eApollo Automation R PRO-1\u003c\/a\u003e as a PoE mmWave presence sensor, or the \u003ca title=\"Sensy-One slimhuisje.nl\" href=\"\/en\/collections\/sensy-one\"\u003eSensy E1 Pro Multi-Sense\u003c\/a\u003e as an environmental sensor. It can also be used in combination with PoE IP cameras in your \u003ca title=\"Security cameras slimhuisje.nl\" href=\"\/en\/collections\/beveiliging\"\u003esecurity setup\u003c\/a\u003e. If you need multiple extenders for a longer chain, they can be daisy-chained.\u003c\/p\u003e\n\u003ch3\u003eSafety and reliability\u003c\/h3\u003e\n\u003cp\u003eThe extender has built-in protection against power surges and incorrect connection (reverse wiring protection). The housing is compact ABS, fanless, and suitable for use from -10°C to 50°C. Humidity: 10%–90% non-condensing.\u003c\/p\u003e\n\u003ch3\u003eHome Assistant\u003c\/h3\u003e\n\u003cp\u003eThe PoE extender does not have its own HA integration; it is a passive network device. Which entities and integration you get depends on the connected device:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eSMLIGHT SLZB dongle: detectable via the SMLIGHT SLZB integration, fully local without cloud. Connect via ZHA or Zigbee2MQTT to the serial port over the network.\u003c\/li\u003e\n\n\u003cli\u003eApollo Automation R PRO-1: via ESPHome integration. Entities: presence detection, distance, motion zone, RSSI.\u003c\/li\u003e\n\n\u003cli\u003eSensy E1 Pro Multi-Sense: via ESPHome or custom integration. Entities: temperature, humidity, CO², presence.\u003c\/li\u003e\n\n\u003cli\u003eIP camera: via ONVIF or manufacturer-specific integration, including Frigate NVR support.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003ePairing procedure for SMLIGHT SLZB dongle via extender\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eConnect the extender's PoE IN port to your PoE switch or PoE injector.\u003c\/li\u003e\n\n\u003cli\u003eConnect the SLZB dongle to one of the two PoE OUT ports using an 8-wire Cat5e cable.\u003c\/li\u003e\n\n\u003cli\u003eWait for the dongle to obtain an IP address via DHCP.\u003c\/li\u003e\n\n\u003cli\u003eIn HA, go to Settings \u0026gt; Devices \u0026amp; services \u0026gt; Add integration \u0026gt; SMLIGHT SLZB and enter the IP address.\u003c\/li\u003e\n\n\u003cli\u003eConnect ZHA or Zigbee2MQTT to the dongle's serial port over the network.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003ePoints to consider\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCombined output power is a maximum of 12.2W; distribute this across two devices (e.g., 2x 6W).\u003c\/li\u003e\n\n\u003cli\u003eEthernet speed is a maximum of 100 Mbps; Gigabit is not supported.\u003c\/li\u003e\n\n\u003cli\u003eUse at least Cat5e for the full 100-meter range.\u003c\/li\u003e\n\n\u003cli\u003eThe extender only works with IEEE 802.3af-compliant devices at the input; passive PoE injectors do not work.\u003c\/li\u003e\n\n\u003cli\u003eDaisy-chaining is possible, but each extension segment consumes a portion of the available power.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eBox contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1x SMLIGHT PoE Extender 1 to 2 (antistatic protection bag)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eCompatible with all IEEE 802.3af devices, including \u003ca title=\"SMLIGHT SLZB series slimhuisje.nl\" href=\"\/en\/collections\/smlight\"\u003eSMLIGHT SLZB-06, SLZB-06M, SLZB-06MG24U, SLZB-MR1 through MR4\u003c\/a\u003e, \u003ca title=\"Apollo Automation slimhuisje.nl\" href=\"\/en\/collections\/apollo-automation\"\u003eApollo Automation R PRO-1\u003c\/a\u003e, \u003ca title=\"Sensy-One slimhuisje.nl\" href=\"\/en\/collections\/sensy-one\"\u003eSensy E1 Pro Multi-Sense\u003c\/a\u003e, IP cameras, VoIP phones, and Wi-Fi access points with PoE support.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePoE standard input\u003c\/td\u003e\n\n\u003ctd\u003eIEEE 802.3af (max. 13W)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePoE standard output\u003c\/td\u003e\n\n\u003ctd\u003eIEEE 802.3af (combined max. 12.2W)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePorts\u003c\/td\u003e\n\n\u003ctd\u003e1x RJ45 PoE IN, 2x RJ45 PoE OUT\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eEthernet speed\u003c\/td\u003e\n\n\u003ctd\u003e10\/100 Mbps\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eMaximum range\u003c\/td\u003e\n\n\u003ctd\u003e+100 meters (Cat5e or higher)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\n\u003ctd\u003ePassive via PoE input, no external power required\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eAuto-sensing\u003c\/td\u003e\n\n\u003ctd\u003eYes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eSecurity\u003c\/td\u003e\n\n\u003ctd\u003eSurge protection, reverse wiring protection\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eHousing\u003c\/td\u003e\n\n\u003ctd\u003eCompact ABS, fanless\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\n\u003ctd\u003e-10°C to 50°C\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\n\u003ctd\u003e10%–90% (non-condensing)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\n\u003ctd\u003eChina\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need an additional power adapter?\u003c\/h3\u003e\n\u003cp\u003eNo. The extender is fully powered via the incoming PoE line from your switch or injector. No separate power outlet or adapter is needed.\u003c\/p\u003e\n\u003ch3\u003eHow many devices can I connect?\u003c\/h3\u003e\n\u003cp\u003eThe extender has two output ports. You can connect two IEEE 802.3af-compatible devices simultaneously, as long as the combined power remains below 12.2W. For example, an \u003ca title=\"Apollo Automation slimhuisje.nl\" href=\"\/en\/collections\/apollo-automation\"\u003eApollo R PRO-1\u003c\/a\u003e and an SLZB dongle can be combined well within this limit.\u003c\/p\u003e\n\u003ch3\u003eDoes the extender also work with the Sensy E1 Pro or Apollo R PRO-1?\u003c\/h3\u003e\n\u003cp\u003eYes, both the \u003ca title=\"Sensy-One slimhuisje.nl\" href=\"\/en\/collections\/sensy-one\"\u003eSensy E1 Pro Multi-Sense\u003c\/a\u003e and the \u003ca title=\"Apollo Automation slimhuisje.nl\" href=\"\/en\/collections\/apollo-automation\"\u003eApollo Automation R PRO-1\u003c\/a\u003e support IEEE 802.3af PoE and are compatible with this extender. This is useful if you want to place them in a location where there is no power outlet or switch nearby.\u003c\/p\u003e\n\u003ch3\u003eCan I daisy-chain multiple extenders?\u003c\/h3\u003e\n\u003cp\u003eYes, that is possible. Each additional segment extends the range by up to 100 meters. However, keep in mind the available power: each extender consumes a small portion of the PoE capacity. Check that the total power of all connected devices falls within the limits of your PoE source.\u003c\/p\u003e\n\u003ch3\u003eWhat kind of cable do I need?\u003c\/h3\u003e\n\u003cp\u003eUse at least Cat5e. For the maximum range of 100 meters per segment, Cat5e or Cat6 is highly recommended. A 4-wire cable is not suitable for PoE.\u003c\/p\u003e\n\u003ch3\u003eDoes this work with Home Assistant?\u003c\/h3\u003e\n\u003cp\u003eThe extender itself has no HA integration. You connect the connected device via its corresponding integration: SMLIGHT SLZB for dongles, ESPHome for Apollo and Sensy sensors, or ONVIF for IP cameras. Everything works completely locally. View the \u003ca title=\"Home Assistant products slimhuisje.nl\" href=\"\/en\/collections\/home-assistant\"\u003eHome Assistant collection\u003c\/a\u003e for suitable hardware.\u003c\/p\u003e\n\u003cp\u003e✅ slimhuisje.nl — Directly available and ready to use without configuration. Questions about the maximum load or daisy-chaining multiple extenders? Our customer service will help you further.\u003c\/p\u003e","brand":"SMLIGHT","offers":[{"title":"Default Title","offer_id":53964997624150,"sku":"POE-EXT-100MB","price":24.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/5921\/3398\/files\/2_wb-scaled.webp?v=1779453088","url":"https:\/\/slimhuisje.nl\/en\/products\/smlight-poe-extender-1-naar-2-100mb","provider":"slimhuisje.nl","version":"1.0","type":"link"}