{"product_id":"shelly-leak-sensor-cable","title":"Shelly Leak Sensor Cable – Extension cable for Shelly Flood Gen4","description":"\u003ch2\u003eExtension Cable for the Shelly Flood Gen4\u003c\/h2\u003e\n\u003cp\u003eThe included 2 m sensor cable of the \u003ca title=\"Shelly smart home products\" href=\"\/en\/collections\/shelly\"\u003eShelly Flood Gen4\u003c\/a\u003e is long enough for a washing machine or dishwasher, but falls short in larger spaces, long pipe shafts, or multiple risk areas in one room. With the Shelly Leak Sensor Cable, you add 2 m of detection length per cable. By connecting multiple cables in series, the total coverage can be scaled up to 150 m, without additional sensors or configuration.\u003c\/p\u003e\n\u003ch2\u003eDetection and Material\u003c\/h2\u003e\n\u003cp\u003eThe cable consists of a conductive polymer on the outside and an insulated polymer on the inside. As soon as water touches the conductive surface – at any point of the cable – the Flood Gen4 detects it immediately. The cable reacts to tap water, rainwater, air conditioning condensate, and extinguishing water. After drying, the cable can be reused without problems.\u003c\/p\u003e\n\u003ch2\u003eConnection and Placement\u003c\/h2\u003e\n\u003cp\u003eBoth ends are equipped with a 3.5 mm jack connector. The cable connects to the Shelly Flood Gen4 or to another Shelly Leak Sensor Cable for further extension. Thanks to its flexible design, the cable can be easily laid along walls, floors, under appliances, or in technical rooms. With Shelly Cable Brackets (10 pieces per pack, sold separately), you can neatly secure the cable.\u003c\/p\u003e\n\u003ch2\u003eApplication in combination with Home Assistant\u003c\/h2\u003e\n\u003cp\u003eThe Shelly Leak Sensor Cable itself has no electronics or protocol: all intelligence resides in the \u003ca title=\"Shelly Flood Gen4 and other Shelly products\" href=\"\/en\/collections\/shelly\"\u003eShelly Flood Gen4\u003c\/a\u003e. Connect the cable to the sensor and the device will automatically report to Home Assistant via WiFi or Zigbee, exactly as configured. No additional setup or entities required.\u003c\/p\u003e\n\u003ch2\u003ePoints of attention\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOnly compatible with the Shelly Flood Gen4\u003c\/li\u003e\n\u003cli\u003eNot suitable for submersion; detects surface water along the cable length\u003c\/li\u003e\n\u003cli\u003eMetal surfaces directly under the cable can cause interference; if in doubt, place a layer of tape or plastic between the cable and the surface\u003c\/li\u003e\n\u003cli\u003eMaximum continuous cable length: 150 m including the cable supplied with the Flood Gen4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBox contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShelly Leak Sensor Cable 2 m (SLSC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eShelly Flood Gen4 | expandable up to 150 m total detection length\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel number\u003c\/td\u003e\n\u003ctd\u003eSLSC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e3800238072131\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable length\u003c\/td\u003e\n\u003ctd\u003e2000 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable diameter (without connector)\u003c\/td\u003e\n\u003ctd\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable diameter (with connector)\u003c\/td\u003e\n\u003ctd\u003e12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e37 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003e3.5 mm jack (both ends)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable color\u003c\/td\u003e\n\u003ctd\u003eBlack and white\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eConductive polymer and insulated polymer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum detection length\u003c\/td\u003e\n\u003ctd\u003e150 m (multiple cables in series)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection\u003c\/td\u003e\n\u003ctd\u003eTap water, rainwater, condensate, extinguishing water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReusable\u003c\/td\u003e\n\u003ctd\u003eYes, after drying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eShelly Flood Gen4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-20°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003e30% to 70% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. altitude\u003c\/td\u003e\n\u003ctd\u003e2000 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eBulgaria\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDoes the Shelly Leak Sensor Cable work with sensors other than the Flood Gen4?\u003c\/h3\u003e\n\u003cp\u003eNo, the cable is exclusively compatible with the \u003ca title=\"Shelly Flood Gen4\" href=\"\/en\/collections\/shelly\"\u003eShelly Flood Gen4\u003c\/a\u003e. The connector and detection principle are specifically designed for this sensor.\u003c\/p\u003e\n\u003ch3\u003eHow many cables can I connect?\u003c\/h3\u003e\n\u003cp\u003eYou can connect multiple Shelly Leak Sensor Cables in series up to a maximum total length of 150 m. This includes the cable supplied as standard with the Flood Gen4.\u003c\/p\u003e\n\u003ch3\u003eDo I need to configure anything in Home Assistant after connecting an extra cable?\u003c\/h3\u003e\n\u003cp\u003eNo. The cable is a passive component without electronics. The Shelly Flood Gen4 detects water along the entire cable length and automatically reports this to Home Assistant, without additional configuration.\u003c\/p\u003e\n\u003ch3\u003eCan the cable get wet without wearing out?\u003c\/h3\u003e\n\u003cp\u003eYes, the cable is reusable. After the cable dries, it will function normally again. The cable is not intended for permanent submersion.\u003c\/p\u003e\n\u003ch3\u003eHow do I neatly secure the cable along a wall or floor?\u003c\/h3\u003e\n\u003cp\u003eShelly Cable Brackets (10 pieces per pack) are sold separately and are specially designed to attach the cable neatly along walls, floors, or skirting boards without drilling.\u003c\/p\u003e\n\u003ch3\u003eDoes the cable also detect condensation or humidity?\u003c\/h3\u003e\n\u003cp\u003eNo, the cable only detects direct contact with water on the surface. Humidity or condensation on the cable will not activate the sensor under normal circumstances. If in doubt, set the State Hold Time on the Shelly Flood Gen4 to filter out momentary contacts.\u003c\/p\u003e\n\u003cp\u003eOrder the detection cable today and protect even the hard-to-reach corners of your home.\u003c\/p\u003e","brand":"Shelly","offers":[{"title":"Default Title","offer_id":53346743583062,"sku":null,"price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/5921\/3398\/files\/71VvNfRjUML._AC_SL1500.jpg?v=1777506399","url":"https:\/\/slimhuisje.nl\/en\/products\/shelly-leak-sensor-cable","provider":"slimhuisje.nl","version":"1.0","type":"link"}