{"product_id":"shelly-dali-dimmer-gen3","title":"Shelly DALI Dimmer Gen3 – Smart Built-in Dimmer for DALI Lighting","description":"\u003ch2\u003eSmart WiFi Controller for DALI Lighting\u003c\/h2\u003e\n\n\u003cp\u003eDALI lighting offers professional dimming control but typically requires a dedicated DALI controller. The Shelly DALI Dimmer Gen3 replaces that controller and adds WiFi, Bluetooth, and home automation integration to your existing DALI installation. This allows you to smart control up to 5 DALI luminaires via the Shelly app, Home Assistant, or another home automation solution, without new wiring.\u003c\/p\u003e\n\n\u003ch2\u003ePower and Connectivity\u003c\/h2\u003e\n\n\u003cp\u003eThe module operates on 110-240 V AC (±10%, 50\/60 Hz) and requires a neutral conductor (N). Its own power consumption is less than 2 W. WiFi operates via 802.11 b\/g\/n at 2.4 GHz with an indoor range of up to 30 meters. Bluetooth 4.2 offers an indoor range of up to 10 meters and also works if the WiFi network temporarily goes down. The module also functions as a WiFi Range Extender for other nearby Shelly devices.\u003c\/p\u003e\n\n\u003ch2\u003eFunctionality and Settings\u003c\/h2\u003e\n\n\u003cp\u003eThe Shelly DALI Dimmer Gen3 functions as a single-master DALI application controller (DT6) and controls all connected DALI luminaires simultaneously via broadcast messages. Color temperature control (CCT) is not supported; only brightness control. The DALI bus guarantees 10 mA at a nominal bus voltage of 16 V and short-circuit protection below 35 mA.\u003c\/p\u003e\n\n\u003cp\u003eIn case of a power outage on the DALI bus, connected luminaires automatically switch to 100% brightness. Through the settings, you can set minimum and maximum brightness, a fade rate, a transition duration from 0 to 100%, and a night mode with a different brightness level. Two switch inputs (S1 and S2) support both switch and push-button operation for on\/off and dimming.\u003c\/p\u003e\n\n\u003ch2\u003eExpansion and Accessories\u003c\/h2\u003e\n\n\u003cp\u003eThe module is compatible with the Shelly Plus Add-on interface for external sensor expansion. Combine the DALI Dimmer Gen3 with other devices from the \u003ca href=\"\/en\/collections\/shelly\" title=\"Shelly collection\"\u003eShelly collection\u003c\/a\u003e for a fully automated lighting system. Do you also want to dim non-DALI lighting? Check out the other \u003ca href=\"\/en\/collections\/uitbreidingen-dimmer-modules\" title=\"Dimmers and modules\"\u003edimmers and modules\u003c\/a\u003e in the assortment.\u003c\/p\u003e\n\n\u003ch2\u003eSafety and Reliability\u003c\/h2\u003e\n\n\u003cp\u003eThe built-in temperature sensor monitors its own operating temperature. The module features TLS 1.2 encryption for secure communication. Use is limited to indoors at -20 °C to +40 °C. ⚠️ The required circuit breaker has characteristic B or C with a minimum breaking current of 6 kA.\u003c\/p\u003e\n\n\u003ch2\u003eHome Assistant\u003c\/h2\u003e\n\n\u003cp\u003eThe Shelly DALI Dimmer Gen3 integrates with \u003ca href=\"\/en\/collections\/home-assistant\" title=\"Home Assistant collection\"\u003eHome Assistant\u003c\/a\u003e via the Shelly WiFi integration.\u003c\/p\u003e\n\n\u003col\u003e\n  \u003cli\u003eConnect the module to your WiFi network via the Shelly app or web interface.\u003c\/li\u003e\n  \u003cli\u003eIn Home Assistant, go to Settings \u0026gt; Integrations. The module will be automatically discovered via mDNS, or you can enter the IP address manually.\u003c\/li\u003e\n  \u003cli\u003eAfter pairing, a light entity for brightness control (0-100%), an internal temperature sensor, and a power sensor will appear.\u003c\/li\u003e\n  \u003cli\u003eLocal control via the HTTP RPC API is confirmed. Cloud connection is optional and can be disabled.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e⚠️ The module controls all connected DALI luminaires as a single group. Individual addressing of separate DALI luminaires via Home Assistant is not possible with this module.\u003c\/p\u003e\n\n\u003ch2\u003eHomey\u003c\/h2\u003e\n\n\u003cp\u003eThe Shelly DALI Dimmer Gen3 works with \u003ca href=\"\/en\/collections\/homey\" title=\"Homey collection\"\u003eHomey Pro\u003c\/a\u003e via the official Shelly app from the Homey App Store. The connection is local via WiFi. Via Homey Bridge, pairing is only possible via the Shelly Cloud. Zigbee and Matter are not applicable to this device.\u003c\/p\u003e\n\n\u003ch2\u003eOther Platforms\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGoogle Home: compatible via Shelly cloud\u003c\/li\u003e\n  \u003cli\u003eAmazon Alexa: compatible via Shelly cloud\u003c\/li\u003e\n  \u003cli\u003eApple HomeKit: not natively supported, but via third-party integrations\u003c\/li\u003e\n  \u003cli\u003eSamsung SmartThings: compatible via Shelly cloud\u003c\/li\u003e\n  \u003cli\u003eDomoticz: compatible via MQTT or the Shelly HTTP API\u003c\/li\u003e\n  \u003cli\u003eKNX: supported via KNXnet\/IP\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAutomation Examples\u003c\/h2\u003e\n\n\u003ch3\u003eAutomatically dimming lights at sunset\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eConnect the Shelly DALI Dimmer Gen3 to Home Assistant via the Shelly integration.\u003c\/li\u003e\n  \u003cli\u003eCreate an automation with trigger: sun sets (offset: +15 minutes).\u003c\/li\u003e\n  \u003cli\u003eAction 1: set the light entity to 40% brightness via service light.turn_on with brightness_pct: 40.\u003c\/li\u003e\n  \u003cli\u003eAction 2: add a second step that dims to 10% for mood lighting at 23:00.\u003c\/li\u003e\n  \u003cli\u003eSave and test via Developer Tools \u0026gt; Actions.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eLighting schedule with presence detection\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003eAdd a \u003ca href=\"\/en\/collections\/bewegingssensor\" title=\"Motion sensors\"\u003emotion sensor\u003c\/a\u003e as a trigger source in Home Assistant.\u003c\/li\u003e\n  \u003cli\u003eTrigger: motion detected in the office.\u003c\/li\u003e\n  \u003cli\u003eCondition: time between 07:00 and 22:00 and brightness lower than 200 lux via a \u003ca href=\"\/en\/collections\/lichtsensor\" title=\"Light sensors\"\u003elight sensor\u003c\/a\u003e.\u003c\/li\u003e\n  \u003cli\u003eAction 1: switch on the DALI lighting to 80% via the light entity.\u003c\/li\u003e\n  \u003cli\u003eAction 2: set an automatic switch-off timer of 15 minutes without motion via a timer helper entity.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2\u003ePoints of Attention\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e⚠️ The neutral conductor (N) is mandatory; installation without a neutral conductor is not possible.\u003c\/li\u003e\n  \u003cli\u003eThe module functions as a single-master DALI controller and does not share the DALI bus with other DALI masters.\u003c\/li\u003e\n  \u003cli\u003eMaximum 5 DALI control gear units on the bus with guaranteed 10 mA bus current.\u003c\/li\u003e\n  \u003cli\u003eColor temperature control (CCT\/DT8) is not supported; only DT6 (brightness control).\u003c\/li\u003e\n  \u003cli\u003eIn case of a DALI bus fault, all luminaires switch to 100% brightness.\u003c\/li\u003e\n  \u003cli\u003eNot suitable for outdoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e1x Shelly DALI Dimmer Gen3 (S3DM-0A1WW)\u003c\/li\u003e\n  \u003cli\u003e1x Multilingual user and safety guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003eHome Assistant (WiFi), Homey Pro, Google Home, Amazon Alexa, Apple HomeKit (via third party), Samsung SmartThings, Domoticz, HomeSeer, IFTTT, KNX (KNXnet\/IP), Shelly Smart Control (iOS and Android), MQTT, local HTTP API, DALI IEC 62386 (DT6).\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eArticle number\u003c\/td\u003e\n\u003ctd\u003eS3DM-0A1WW\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eEAN\u003c\/td\u003e\n\u003ctd\u003e3800235261866\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eShelly\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e110-240 V AC ±10%, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eNeutral conductor required\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOwn consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 2 W\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDALI standard\u003c\/td\u003e\n\u003ctd\u003eIEC 62386, DT6 (brightness control)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eColor temperature control\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMax. DALI control gear units\u003c\/td\u003e\n\u003ctd\u003e5 (at 10 mA guaranteed)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDALI bus voltage\u003c\/td\u003e\n\u003ctd\u003e16 V nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDALI short-circuit current\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 35 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDALI standard on power-up\u003c\/td\u003e\n\u003ctd\u003eOff\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eDALI in case of bus fault\u003c\/td\u003e\n\u003ctd\u003e100% brightness\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSwitch inputs\u003c\/td\u003e\n\u003ctd\u003eS1, S2 (switch or push-button)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWiFi\u003c\/td\u003e\n\u003ctd\u003e802.11 b\/g\/n, 2.4 GHz, range up to 30 m indoors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eBluetooth\u003c\/td\u003e\n\u003ctd\u003e4.2, range up to 10 m indoors\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWiFi Range Extender\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCPU\u003c\/td\u003e\n\u003ctd\u003eESP32-C3 Shelly\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eFlash\u003c\/td\u003e\n\u003ctd\u003e8 MB\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eInternal temperature sensor\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSchedules\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWebhooks\u003c\/td\u003e\n\u003ctd\u003e20 (max. 5 URLs per hook)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eScripting\u003c\/td\u003e\n\u003ctd\u003eYes (JavaScript-based)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMQTT\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eEncryption\u003c\/td\u003e\n\u003ctd\u003eTLS 1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eKNX\u003c\/td\u003e\n\u003ctd\u003eVia KNXnet\/IP\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eShelly Plus Add-on\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eFlush-mounted (junction box)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eGreen\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e30 g\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-20 °C to +40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eSuitable for outdoor use\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eHow do I connect the Shelly DALI Dimmer Gen3 to Home Assistant?\u003c\/h3\u003e\n\u003cp\u003eConnect the module to your WiFi network via the Shelly app or web interface. Home Assistant automatically detects the device via mDNS. Go to Settings \u0026gt; Integrations and accept the notification, or enter the IP address manually. After pairing, a light entity will appear, allowing you to set brightness. More information can be found in the \u003ca href=\"\/en\/collections\/home-assistant\" title=\"Home Assistant\"\u003eHome Assistant collection\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need a hub?\u003c\/h3\u003e\n\u003cp\u003eNo. The Shelly DALI Dimmer Gen3 connects directly via WiFi 2.4 GHz to your home network. A separate DALI controller, hub, or subscription is not required. For use with \u003ca href=\"\/en\/collections\/home-assistant\" title=\"Home Assistant\"\u003eHome Assistant\u003c\/a\u003e, the built-in Shelly integration is sufficient.\u003c\/p\u003e\n\n\u003ch3\u003eHow many DALI luminaires can I connect?\u003c\/h3\u003e\n\u003cp\u003eThe module guarantees 10 mA bus current, which is sufficient for a maximum of 5 DALI control gear units. With more luminaires or higher bus current demand, the bus may be overloaded. Always check the power consumption of your DALI luminaires in the manufacturer's datasheet. Short-circuit protection activates at currents above 35 mA.\u003c\/p\u003e\n\n\u003ch3\u003eCan I control luminaires individually?\u003c\/h3\u003e\n\u003cp\u003eNo. The Shelly DALI Dimmer Gen3 controls all connected luminaires simultaneously via broadcast messages. Individual DALI addressing per luminaire is not possible. If you want to control separate channels, check out the other \u003ca href=\"\/en\/collections\/uitbreidingen-dimmer-modules\" title=\"Dimmers and modules\"\u003edimmers and modules\u003c\/a\u003e in the assortment.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the module also work without WiFi?\u003c\/h3\u003e\n\u003cp\u003eLocal control via the two switch inputs (S1\/S2) always works, regardless of the WiFi connection. Smartphone control and home automation integration require an active WiFi connection. Bluetooth offers a limited fallback for local control via the Shelly app within a 10-meter range.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the DALI Dimmer Gen3 support color temperature control?\u003c\/h3\u003e\n\u003cp\u003eNo. The module only supports DT6 (brightness control). Color temperature control (CCT, DT8) and RGB control are not supported. For smart lighting with color control, check out the \u003ca href=\"\/en\/collections\/lichtbronnen\" title=\"Smart lamps and light sources\"\u003elamps and light sources\u003c\/a\u003e in the assortment.\u003c\/p\u003e\n\n\u003ch3\u003eIs the neutral conductor mandatory?\u003c\/h3\u003e\n\u003cp\u003eYes. The Shelly DALI Dimmer Gen3 requires a neutral conductor (N) for power supply. Installation without a neutral conductor is not possible. This distinguishes the module from the regular \u003ca href=\"\/en\/collections\/uitbreidingen-dimmer-modules\" title=\"Dimmers and modules\"\u003eShelly Dimmer Gen3\u003c\/a\u003e, which also works without a neutral conductor with a bypass.\u003c\/p\u003e\n\n\u003cp\u003e💡 Order the Shelly DALI Dimmer Gen3 today at slimhuisje.nl and give your DALI installation an immediate smart upgrade. Smart lighting starts here!\u003c\/p\u003e","brand":"Shelly","offers":[{"title":"Default Title","offer_id":53345938538838,"sku":"S3DM-0A1WW","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/5921\/3398\/files\/Shelly-Dali-Dimmer-Gen3-main-image.webp?v=1777503440","url":"https:\/\/slimhuisje.nl\/en\/products\/shelly-dali-dimmer-gen3","provider":"slimhuisje.nl","version":"1.0","type":"link"}